Entries

What to Expect from Grease Trap Cleaning Service?

Installing and using any system is easier than maintaining that system and this is why grease trap cleaning service is required for grease traps. People often find it difficult to maintain the grease trap installed at their property and have concerns such as when it should be cleaned, how to clean it ( draneranger.com/grease-grit-lint-traps ), and who should clean it. The service of the grease trap depends upon its usage and the volume of grease it accumulates, but there are facts about grease traps that can answer these concerns.

What is grease trap?

Grease trap is a pumping system that prevents FATS (fats, oils, grease, and solids) from reaching the wastewater treatment plant. There are different sizes of grease trap available and are used at both commercial and residential properties. Since the grease trap stops decompose to pass into the sewer system, regular grease trap cleaning service is required. If it is left unclean for longer, there may be a foul odor, blocked grain pipes, restricted water flow all causing the system breakdown.

How frequent should grease trap be cleaned?

• Grease trap cleaning service measures the grease water ratio of the waste which helps in deciding its cleaning cycle.

• Grease tank at places like restaurants, school cafeteria, or coffee shop might need frequent cleaning because of the high volume of sludge whereas the grease trap at a residential property might not need equally frequent cleaning.

• Some companies also follow the one-fourth rule where grease traps are cleaned when the one-fourth part of them are filled with FATS. This means on an average; every grease trap must be cleaned at least once in a month or three according to their size.

How is grease trap cleaned?

Grease trap is cleaned in different stages during grease trap cleaning service.

• The lid of the grease tank is removed and cleared of all the deposits at the top of the grease tank.

• After the top is cleared, remaining sludge is pumped out of the grease tank.

• Once it is cleared of all the liquid and the deposits, the lid, sides, and baffles are cleaned using the scrapers.

• The inlets and outlets of the pipes are also cleaned of any kind of accumulations.

• At last, a test is run through the system using the water to check the smooth flow, and wherever required, cleaning is done again.

• The deposit which is removed from the grease trap is disposed at the dedicated place in compliance with local regulation.

Who should clean the grease trap?

Grease trap cleaning service is provided by the registered companies. The companies have the trained professionals and are equipped with proper machineries and a protocol of cleaning ( http://draneranger.com/services/ ). These professionals are also approved by the local regulation of their training. It is required for every grease trap to have a maintenance report that explains the time and method of its cleaning. The report is also prepared by the team of service provider.